Technical Article

  • Wear factors of hammer head in hammer crusher

    Wear factors of hammer head in hammer crusher

    1.influence of linear velocity Linear velocity is the working parameter that affects the wear of hammer head. The linear velocity directly affects the size of impact energy, crushing ratio and particle size of the product. In addition, exce... ...More>>

    2019-02-11
  • Preventive measures for Spindle fracture of Cone Crusher

    Preventive measures for Spindle fracture of Cone Crusher

    1.For the operator responsible for shoveling, loading and transportation, it is necessary to raise the awareness of maintenance and maintenance of the equipment, to ensure the integrity of the bucket, conveyor belt and hinged pin shaft, and... ...More>>

    2019-01-24
  • Five basic forms of Mechanical Energy Breaking

    Five basic forms of Mechanical Energy Breaking

    Attrition crushing : the material is broken mainly through the pressure between the two working faces. Splitting and crushing: this kind of equipment is crushed mainly by squeezing the ore with a sharp edge and a worksheet with a sharp edge... ...More>>

    2018-12-10
  • Advantages and disadvantages of jaw Crusher Drive

    Advantages and disadvantages of jaw Crusher Drive

    Jaw crusher uses belt drive, is a kind of power transmission mode which can transfer the kinetic energy generated by the motor through the pulley and belt to the mechanical equipment. Its biggest characteristic is can change speed freely, d... ...More>>

    2018-12-06
  • Replacement of impact board

    Replacement of impact board

    1. Open the upper frame, remove the nuts and bolts used to fix the counterattack liner, and replace the worn counterattack liner. If a new counterattack liner is installed, reverse the above steps. 2.All linings should be opened on the back... ...More>>

    2018-11-26
  • Cone crusher iron and cavity cleaning

    Cone crusher iron and cavity cleaning

    When the foreign body (such as iron) passes through the crushing chamber, the spring compression increases to reduce the pressure of the spring on the clamped material in the crushing chamber, and then the material in the broken chamber can... ...More>>

    2018-11-14